Check The Signal Strength; Switch The Handset On Or Off - Philips M335 Extended User Documentation

It remains steadily on when browsing
answered incoming calls in the call log.
It indicates an outgoing call in the
redial list.
It flashes when there is a new missed
call or when browsing the unread
missed calls in call log.
It remains steadily on when browsing
the read missed calls in call log.
It flashes when receiving incoming call.
It remains steadily on when you are
in a call.
The speaker is on.
The ringer is off.
Answering machine (M335 only):
it flashes when there is a new
message or when the memory is full.
It is displayed when the telephone
answering machine is turned on.
It flashes when there is a new voice
message.
It remains steadily on when the voice
messages are already viewed in the
call log.
The icon is not shown when there is
no voice message.
It is displayed when you scroll up /
/
down a list or increase / decrease the
volume.
There are more digits on the right.
Press REDIAL/C to read.
ECO+ The ECO+ mode is activated.

Check the signal strength

The number of bars indicates
the connection status between
the handset and base station. The
more bars are shown, the better
the connection is.
• Make sure the handset is connected to the
base station before you make or receive calls
10 EN
and carry out the phone functions and
features.
• If you hear warning tones when you are
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
nearer to the base station.
Note
•
When ECO+ is on, the signal strength is not displayed.

Switch the handset on or off

Press and hold to switch the handset on or
off.