Wet/Dry Vac Assembly - RIDGID RT1400 Owner's Manual

SP6939-1 16 GALLON ESF1_SP6939-1 1/16/15 9:39 AM Page 8
1.800.561.8187
Drum/Caddy Assembly (continued)
Installing Accessory Bag
Install accessory bag by wrapping the
four accessory bag straps around the
metal handle.
Secure accessory bag by snapping each
of the four snaps.

Wet/Dry Vac Assembly

1. Position the power head assembly on
the drum/caddy assembly as shown
(assembled earlier).
2. Rotate both latches down and press
until you hear them snap over the
flanges on the drum.
Insert Hose
Insert the push button end of the pro-
hose into the inlet of the Vac. The hose
should snap into place.
To remove the hose from the Vac, press
the release button in the hose assembly
and pull the hose out of the Vac inlet,
as shown.
Press Release
and Button
Pull
www.
Accessory
Accessory
Bag Straps (4)
Bag Snaps
Drum
Latch
Powerhead
Assembly
Latch
Drum
8
information@itm.com
.com
Handle
Drum
Latch
Drum
Flange