― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image.
― Make sure to use the styrofoam (cushion) that came
with the monitor.
Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
2
Grab the stand with one hand and use the thumb
on your other hand to remove the COVER-STAND
NECK LEFT in the direction of the arrow.
3
B
A
Unfasten screws for
A
and
B
.
― The screws are also used to attach the Wall-mount