Upgrading The Software Via Usb - Samsung C34J791 User Manual

Upgrading the Software via USB

1
Be sure to insert the USB disk into the USB port marked out with the blue box as shown in the figure
below. You can upgrade the software via USB only if either the monitor screen operates normally or
the check signal is displayed on the monitor screen.
When the screen as shown in the following figure is displayed, press and hold the Down arrow key for
5 seconds.
Power Off
2
When the message as shown in the following figure is displayed on the monitor, select
upgrade the software.
Do you want to update via USB?
Check Signal Cable
HDMI
3
When the screen as shown in the following figure is displayed, select Yes.
Update from version 0802.0 to version 0803.0
4
The software upgrading proceeds.
Updating product Software...
Your product will turn itself off and on again
automatically after completing update.
Yes No
Update now
Yes No
Update now
0%
Yes to
15