Print Results Not Satisfactory - Canon Pixma MG5650 Online Manual

Table of Contents

Print Results Not Satisfactory

If the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the

paper and print quality settings first.

Do the page size and media type settings match the size and type of the loaded

When these settings are incorrect, you cannot obtain a proper print result.

If you are printing a photograph or an illustration, incorrect paper type settings may reduce the quality of the

printout color.

Also, if you print with an incorrect paper type setting, the printed surface may be scratched.

In borderless printing, uneven coloring may occur depending on the combination of the paper type setting and

the loaded paper.

The method of confirming the paper and print quality settings differs depending on what you do with your

To copy by operating the machine

To copy photo by operating the machine

To print from a PictBridge (Wireless LAN)

compliant device

To print from a computer

Make sure that the appropriate print quality is selected referring to the table in

Select a print quality option suitable for the paper and image for printing. If you notice blurs or uneven colors,

increase the print quality setting and try printing again.

• When printing from a PictBridge (Wireless LAN) compliant device, set the print quality setting by using the

operation panel on the machine.

You cannot make this setting from a PictBridge (Wireless LAN) compliant device.

If the problem is not resolved, there may be other causes.