Samsung MultiXpress K760 Series User Manual page 259

Understanding display messages
Message
The room temperature is The machine is in a
not suitable for this set room with improper
use. Please adjust room room temperature.
temperature
This IP address conflicts The IP address is used
with that of other system. elsewhere.
Check it
Toner Cartridge Failure: There is a problem in
[error number]. Call for the toner cartridge.
service
Toner cartridge is not The imaging unit you
compatible. Check users have installed is not for
guide your machine.
TR Failure: [error The transfer roller is
number]. Install transfer not installed.
roller again
Tray failure [error The tray is not securely
number]. Check Tray connected.
connection
Meaning Suggested solutions
Please adjust room
temperature (see
"Adjustment" on page
319).
Check the IP address or
obtain a new IP address.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Install a Samsung-genuine
imaging unit, designed for
your machine (see
"Available supplies" on
page 213).
Install the transfer roller. If
it is already installed, try to
reinstall the transfer roller.
If the problem persists, call
for service.
Reinstall the tray. If the
problem persists, call for
service.
Message
Tray failure [error The tray is not securely
number]. Pull [tray connected.
number] out and insert it.
Call for service if the
problem persists
[tray number] is not The tray is not properly
installed. Install the tray installed.
[tray number] cassette is The tray is not securely
pulled out. Insert it latched.
properly
[tray number] door is The tray door is not
open. Close it securely latched.
UI System Failure: [error There is a problem in
number]. Call for service the UI system.
802.1x authentication Fail to authenticate.
failed. Please Contact the
System Administrator
a. Estimated cartridge life means the expected or estimated cartridge, which indicates the
average capacity of print-outs and is designed pursuant to ISO/IEC 19752. The number of
pages may be affected by the percentage of image area, operating environment, printing
interval, media type and media size.
Meaning Suggested solutions
Reinstall the tray. If the
problem persists, call for
service.
Reinstall the tray. If the
problem persists, call for
service.
Close the tray until it locks
into place.
Close the tray door until it
locks into place.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Check the network
authentication protocol. If
the problem persists, call
for service.
10. Troubleshooting
259