KitchenAid KRMF706ESS01 User Instructions page 24

1. Place a sturdy measuring cup (1 cup [237 mL] size) on the
dispenser tray centered in front of the water dispenser paddle.
NOTE: Depending on your model, a measuring cup may be
provided.
A
B
A. Water dispenser paddle
B. Measuring cup (1 cup)
2. Press and hold the Options and Lock buttons at the same
time for 3 seconds. The words "Back" and "1 Cup" will appear
on the display screen. Also, the Calibrate Measured Fill icon
will illuminate and remain lit while the Measured Fill feature is
being calibrated.
NOTE: You may press ICE MODE "Back" at any time to
exit Calibration mode. The Calibrate Measured Fill icon will
disappear.
3. Press and release the dispenser paddle, as needed, to
dispense water to the 1 cup fill line.
24 24 24 24 24 24
NOTE: If overfilling or spilling occurs, discard the water and
press ICE/WATER "Back" to restart the calibration process.
4. When 1 cup of water has been correctly dispensed into the
measuring cup, press the Measured Fill button under the word
"Confirm" to confirm the calibration.
A
A. 1 cup of water
5. When Measured Fill calibration has been confirmed, the icons
will disappear and the display will return to the home screen.
Dispensing
Press ICE/WATER to toggle through the following choices in a
continuous loop:
■ Water (default) - Dispenses water.
■
Cubed - Dispenses cubed ice.
■ Crushed - Dispenses crushed ice.
NOTES:
■ The word "ICE" appears on the display screen when either
crushed or cubed ice is selected.
■ For crushed ice, cubes are crushed before being
dispensed. This may cause a slight delay when dispensing
crushed ice. Noise from the ice crusher is normal, and
pieces of ice may vary in size.