Table of Contents
Advertisement
UNIFORMITY
Tag2
SHARPNESS
RESPONSE
IMPROVE
ECO MODE
AUTO BRIGHTNESS
METAMERISM
AMBIENT LIGHT
COMP.
(6 - AXIS ADJUST)
SHORTCUT
CUSTOM
Tag3
DIGITAL LONG
CABLE
(DVI/HDMI input only)
Tag4
AUTO ADJUST*
(Analog input only)
AUTO CONTRAST*
(Analog input only)
CONTRAST
(Analog input only)
BLACK LEVEL
(Analog input only)
VIDEO LEVEL
(HDMI input only)
*1 This item does not reset by FACTORY PRESET (Tag7).
This function electronically compensates for the slight variations in the white uniformity
level as well as for deviations in color that may occur throughout the display area of
the screen. These variations are characteristic of LCD panel technology. This function
improves the color and evens out the luminance uniformity of the display.
NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the
display. If greater luminance is desired over the uniform performance of the display,
then UNIFORMITY should be turned off. A higher number produces a better effect, but
may also reduce CONTRAST RATIO. When BRIGHTNESS is shown in magenta, the
UNIFORMITY setting is automatically reduced.
This is a digital capability for keeping a crisp image at all signal timings. It continuously
adjusts to maintain as distinct or as soft image as you prefer, and is set independently
according to different timings. Press "LEFT" or "RIGHT" to adjust.
Turns the Response Improve function on or off. Response Improve may reduce blurring
that occurs in some moving images.
Decreases the amount of power consumed by reducing the brightness level.
OFF: No function.
MODE1: Decreases the maximum possible brightness up to about 200 cd/m
MODE2: Decreases the maximum possible brightness up to about 100 cd/m
AUTO BRIGHTNESS has two settings. "OFF" is recommended for best color reproduction.
OFF: No function.
ON: Adjusts the brightness automatically, by detecting the brightness level of your
environment and adjusting the monitor with the best BRIGHTNESS setting.
Please refer to Page 29 for full "Auto Brightness" information.
Note: Do not cover environmental brightness sensor (ambient light sensor).
Improves the white point color matching when the display used side-by-side with a
standard gamut display monitor. This feature compensates for the way the human
eye perceives colors slightly differently compared to the scientifi c instrument used to
adjust the display during calibration. This function should be disabled in color-critical
applications.
Luminance setting depends on ambient light compensation.
This setting mostly affects black reproduction.
NOTE: Ambient light sensor measures ambient brightness when power is on and affects
image and color quality settings.
NOTE: Do not cover environmental brightness sensor (ambient light sensor).
HUE: Adjusts the hue of each color*
menu color bars will show the amount of adjustment.
SATURATION: Adjusts the color depth of each color*
color vividness increases.
OFFSET: Adjusts the color brightness of each color*
color Brightness increases.
*2: RED, YELLOW, GREEN, CYAN, BLUE and MAGENTA.
You can select the PICTURE MODE which are displayed in PICTURE MODE shortcut
menu.
Compensates for image degradation caused by using a long cable.
A lower number produces less compensation.
1
Automatically adjusts the Image Position and H.SIZE settings and FINE settings.
Press "SELECT" to activate Auto Adjustment. Please use test pattern, which is included
in the enclosed CD-ROM.
1
Adjusts the image displayed for non-standard video inputs. Press "SELECT" to adjust.
Any adjustment requires the image to have white portions.
Adjusts the image brightness and contrast in relation to the background.
Press "LEFT" or "RIGHT" to adjust.
Adjusts the RGB black level by input signal level.
NORMAL: For computer setting. Displays all input signals of 0-255 steps.
EXPAND: For audio-visual equipment setting. Expands input signals of 16-235 steps to
0-255 steps.
AUTO: Auto setting depending on the input signal.
1
. The change in color will appear on screen and the
English-20
2
.
2
.
2
. Press the "RIGHT" button and the
2
. Press "RIGHT" button and the
Advertisement
Table of Contents
