Table of Contents
Advertisement
3. Height adjustment is locked by lock button. Place hand on top of the monitor to push down the screen to the lowest position.
Slide the lock button to unlock the stand to raise the monitor head (Figure B.1).
NOTE:
Handle with care when unlocking stand.
Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position.
Slide the cable cover up (Figure B.2).
NOTE:
Cable cover is not removable.
Figure B.1
4. Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector
to the USB upstream port on the right back side of the monitor and the A type connector to the downstream port on the
computer (Figure C.1a). If using the cord from a USB device, plug into one of the downstream ports of the monitor.
NOTE:
Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module
and/or shorten the module's life.
USB downstream
Highest
Stand
Position
USB upstream
USB downstream
Audio input
Audio input
DisplayPort
DVI-D
DVI-D
Headphone
Headphone
HDMI
Figure C.1
30° Tilt
D-SUB
Power cord
Cable cover
B Type
English-7
30° Tilt
Figure B.2
A Type
A Type
B Type
Figure C.1a
Advertisement
Table of Contents
