About This Manual; Tool Specifications - Jet 505921 Operations & Parts Manual

Pneumatic riveter
Table of Contents

Advertisement

About this manual

This manual is provided by JET, covering the safe operation and maintenance procedures for a JET Model
JAT-920 Pneumatic Riveter. This manual contains instructions on safety precautions, general operating
procedures, maintenance procedures and parts breakdown. Your tool has been designed and constructed
to provide consistent, long-term operation if used in accordance with the instructions set forth in this
document.
The instructions and warnings in this manual may not encompass all possible workplace environments. The
operator is expected to take appropriate precautions and exercise common sense. As with any tool
operation, safety of operator and bystanders should be first priority.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at
our web site: www.jettools.com.
Record the serial number and purchase information of your tool on the cover of this manual for quick access.
Retain this manual for future reference. If the tool transfers ownership, the manual should accompany it.

Tool specifications

Model number
Stock number
Capacity, mild steel
Maximum pulling load
Blind rivet setting capacity
Stroke length
Traction power
Included nosepieces
Air inlet
Air hose inside diameter
Required air pressure
Overall Length
Housing material
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
 
JAT-920
505921
3/16 in.
2,000 lb.
3/16 in.
9/16 in.
1,940 lb.
Four: 3/16, 5/32, 1/8, 3/32 in.
1/4 in. NPT
3/8 in.
90 psi (621 kPa)
10-3/4 in. (273 mm)
Aluminum
3.48 lb. (1.58 kg)
3.81 lb. (1.73 kg)
JET
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jat-920

Table of Contents