Assembly - Char-Broil 10101480 Product Manual

ASSEMBLY

Tools required for assembly:
Phillips Screwdriver (Not Supplied); Small Adjustable Wrench (Not Supplied)
• Remove top cover, cooking basket and cooking pot.
1
• Turn appliance upside down.
• Attach legs to body using three #10-24 x 1/2" screws and three #10-24 Keps nuts for each leg. Insert screw through
appliance body from outside, then through matching hole in leg and apply the #10-24 Keps nut. Assure leg with rating
label is attached behind burner tube outlet as pictured.
Qty: 12 Qty: 12
#10-24x1/2" Screw #10-24 Keps Nut
2
• While the appliance is upside down, take a moment to ensure the grease tray slides into the grease tray rails smoothly. If
not, loosen the screws shown below and adjust the grease tray rails as necessary. Once adjustments are complete - tighten
the screws.
Screw located at
of the grease rails.
Burner
#10-24x3/8"
each end
necessary to ensure smooth
operation, then tighten screws.
#10-24
Keps Nuts
Adjust the grease rails as
Leg Assembly
with Rating Label
#10-24x1/2"
Screw
Grease Tray Rail
Slide the Grease Tray into the
Grease Tray Rails to ensure
smooth operation.
Grease Tray Rail
13