Balt LX-72B Assembly Instructions Manual page 7

To Secure Cam
Locks, Insert
Large Phillips
Head Screw-
driver and turn
Cam Lock 1/4
turn (90 degrees)
clockwise.
20.
Slide Bottom Panel (P-3) over the Wood Dowels (E) and the Camposts (D) in the Right
Side Panel (P-2) as shown in illustration #6. Secure by turning the Cam Locks (C)
1/4 turn until they lock.
Slide 2 Top Supports (P-5) over the Wood Dowels (E) in the Right Side Panel (P-2).
21.
22.
Slide 2 Top Front Braces (P-6)
over the Wood Dowels (E1) in
the Divider Panel (P-4) as
shown in illustration #7.
23.
Slide 4 Dowels (E1) in Divider
Panel (P-4) into the end of 2
Top Supports (P-5) as shown
in illustration #7.
24. Secure Divider Panel (P-4)
to Bottom Panel (P-3) using
2 Wood Screws (B) as
shown in illustration # 7.
Slide 2 Top Supports (P-5) over the Wood
25.
Dowels (E1) in the Divider Panel (P-4).
26.
Secure Top Front Brace (P-6) to Right Side
Panel (P-2) using 2 Wood Screws (B) as
shown in illustration # 7.
Illustration # 6
P-5
E
B
B
P-2
P-5
P-2
P-3
P-6
E1
P-6
B
7
P-3
D
C
E
P-4
P-5
E1
P-5
P-5
Illustration # 7
P-5