Other Features; Set The Alarm Timer; Set The Sleep Timer; Play From An External Device - Philips MCM233/58 User Manual

7 Other features

Set the alarm timer

This unit can be used as an alarm clock. The
disc/radio/USB is activated to play at a preset
time.
Note
•
Ensure that you have set the clock correctly.
1
Press to switch to standby mode.
2
Press and hold SLEEP/TIMER for more
than two seconds.
» A prompt to select the source is
displayed.
3
Press CD, TUNER, USB to select a
source.
4
Press SLEEP/TIMER to confirm.
» The clock digits are displayed.
» The hour digits begin to blink.
5
Press / to set the hour.
6
Press SLEEP/TIMER to confirm.
» The minute digits begin to blink.
7
Press / to set the minute.
» The timer is set and activated.
is displayed.
»

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
» When sleep timer is activated,
displayed.
2
Press SLEEP/TIMER repeatedly until
[OFF] (off) is displayed.
» When sleep timer is deactivated,
disappears on the display.

Play from an external device

You can also listen to an external audio device
through this unit.
1
Press MP3 LINK to select the MP3 link
source.
2
Connect the supplied MP3 link cable to:
the MP3 LINK jack (3.5mm) on the
•
unit.
• the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
is
EN 17