Table of Contents
Advertisement
Connecting to the Appliance
Unscrew the metal threaded collar nut at
1
the back of the appliance and place it over
one end of the water tube.
Firmly push the water tube onto the water
2
inlet valve and tighten up the collar nut.
Checking the Water Connection
Turn on the water supply and switch on the
1
appliance. Carefully check all fittings for
possible leaks due to poorly fitted hoses.
Press and hold the Water Filter button for
2
three seconds. That resets the Replacement
Filter icon. The new water filter has been
activated.
Place a cup under the water dispenser to
3
verify that water is flowing through the
appliance.
Check the connecting tube and joints for
4
leaks once again.
The water filter should be fixed at a
5
appropriate place where it is easy to reach
for replacement purposes.
EN
21
Advertisement
Table of Contents
