Icemaker - LG GS-M8259PZ Owner's Manual

Icemaker

This is where ice is manually produced and
stored.
Making Ice
<Type 1>
1
Hold the handle of ice tray and pull it out.
2
Fill the ice tray with water up to the water
level.
3
Place the ice tray back to its position
carefully not to spill water on the floor.
CAUTION
• Do not freeze any liquids (barley tea, juice)
other than water. Doing so could cause the
icemaker to malfunction.
• Check whether there is any ice remaining in
the ice tray before putting water into it.
• When adding water, fill it up to the water line.
Adding too much water could cause the ice
dispenser to malfunction.
• After filling with water, be careful not to spill
any water when inserting the ice tray into the
icemaker.
• Do not close the freezer door roughly after
filling the ice tray with water.
24
Taking Out Ice
<Type 2>
1
Rotate the ice separation handle on the
icemaker clockwise.
5
Lift the ice storage bin slightly and remove.
CAUTION
• If you open and close the freezer door
frequently, it may take longer for water to be
frozen.
• There may be slight differences in the time it
takes the water to freeze depending on the
season.
• The time for water to be frozen may vary
according to the season. Until 24 hours after
initial installation, the temperature inside the
appliance may not be stabilized so that it may
take longer for water to be frozen.
• Make sure to be careful as the edges of the
ejected ice may be sharp.
EN