Child Lock - LG F1232RDSW Owner's Manual

H ow to use washer
NOTE
Auto Tub clean notification function(
• When you turn on the power by pressing
the Power button, and the following sign is
shown on the panel, it means that you need
to clean the drum. Press the spin and temp.
button simultaneously to clean the Tub.
• If you want to proceed with normal wash
course and not the Tub Clean, turn the
course selection dial or press the button of
the course and cycle you want.
• "Tub Clean" message will be appeared on
the panel only for once after operating 30
times.
• Please proceed with the Tub Clean
frequently for your product to use without
troubles.
)
Use this option to prevent unwanted use of
the washer or to keep cycle settings from
being changed while the washer is operating.
• Child lock can be set by pressing and
holding the Wash and Rinse button
simultaneously. (About three seconds)
• When CHILD LOCK is set, the Child Lock
indicator will appear and all buttons are disabled
except the ON/OFF button.
• To deactivate Child lock system, press and
hold the Wash and Rinse button
simultaneously again. (About three seconds)
• To change to the desired program, whilst in
child lock mode.
1. Press and hold both Wash and Rinse
button together once again.
(About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
NOTE
• CHILD LOCK lasts after the end of cycle.
If you want to deactivate this function, Press
and hold the Wash and Rinse button
simultaneously for 3 seconds.

Child Lock

Change
the desired
program
27