Table of Contents
Advertisement
TD-W9980B
1.
Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address
is
XX:XX:XX:XX:XX:XX
00:1D:0F:11:22:33.
2.
Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
3.
Select Enabled or Disabled for this entry on the Status drop-down list.
4.
Click the Save button to save this entry.
To edit or delete an existing entry:
1.
Click the Edit in the entry you want to modify.
2.
Modify the information.
3.
Click the Save button.
Click the Enable/ Disabled Selected button to make selected entries enabled or disabled.
Click the Delete Selected button to selected entries.
For example: If you desire that the wireless station A with MAC address 00:1D:0F:11:22:33 and the
wireless station B with MAC address 00:0A:EB:00:07:5F are able to access the modem router, but
all the other wireless stations cannot access the Modem router, you can configure the Wireless
MAC Address Filtering list by following these steps:
5.
Click the Enable button to enable this function.
6.
Select the radio button "Allow the stations specified by any enabled entries in the list to
access" for Filtering Rules.
7.
Delete all or disable all entries if there are any entries already.
8.
Click the Add New button.
5)
Enter the MAC address 00:1D:0F:11:22:33/00:0A:EB:00:07:5F in the MAC Address field.
6)
Enter wireless station A/B in the Description field.
7)
Select Enabled in the Status drop-down list.
8)
Click the Save button.
The filtering rules that configured should be similar to the following list:
4.9.5 Wireless Advanced
Choose menu "Wireless 5GHz""Wireless Advanced", you can configure the advanced settings
of your wireless network.
N600 Wireless Dual Band Gigabit VDSL2 Modem Router (Annex B) User Guide
(X
is
any
hexadecimal
65
digit).
For
example:
Advertisement
Table of Contents
