Lenovo ThinkPad L380 Hardware Maintenance Manual page 69

Table 12. System board connector and cable guide
Item
Connector (location)
1
Sensor board connector
2
Wireless-LAN card slot (internal)
3
Thermal fan connector (internal)
4
M.2 solid-state drive connector
(internal)
5
Memory module slots (internal)
6
Rear camera board connector
(internal)
7
LCD connector (internal)
8 9
USB-C connectors (external)
10
Always On USB 3.1 connector
Gen 1 (external)
11
HDMI connector (external)
12
NFC board connector (internal)
13
Battery connector (internal)
14
Trackpad connector (internal)
15
Coin-cell battery connector
(internal)
16
Fingerprint reader card connector
(internal)
17
Speaker assembly connector
(internal)
18
Power button board connector
Internal cable required
Sensor board connector cable
No
Thermal fan assembly cable
No
No
Rear camera board cable
LCD cable
No
No
No
NFC board cable
No
Trackpad cable
Coin-cell battery cable
Fingerprint reader cable
Speaker assembly cable
Power button board cable
Cable connection
Connect one end to the sensor
board and the other end to this
connector.
Insert the wireless-LAN card into
this slot.
The thermal fan assembly comes
with cable. Connect the cable to
this connector.
Insert the M.2 solid-state drive into
this slot.
Insert the memory module into this
slot.
Connect one end to the rear
camera board connector on the
rear camera board and the other
end to this connector.
Connect one end to the LCD panel
and the other end to this
connector.
Connect a USB-C compatible
device to this connector.
Connect USB 3.1-compatible
devices to this connector.
Connect a compatible digital audio
device or video monitor to this
connector.
The NFC board comes with the
NFC board cable. Connect one
end to this connector and the
other end to the NFC board.
Connect the battery to this
connector.
Connect one end to the trackpad
and the other end to this
connector.
The coin-cell battery comes with
cable. Connect the cable to this
connector.
Connect one end to the fingerprint
reader connector on the fingerprint
reader card and the other end to
this connector.
The speaker assembly comes with
cable. Connect the cable to this
connector.
Power button board comes with
cable. Connect the cable to this
connector.
.
Chapter 7 Locations
63