Table of Contents
Advertisement
6. Stabilizer, Zoom and Flash
•
The Image Stabilizer may produce operational sound or cause vibration during its
operation, but these are not malfunctions.
•
It is recommended to disable the Image Stabilizer when using a tripod.
•
The stabilizer function may not be effective in the following cases.
Be careful of camera jitter when you press the shutter button.
–
When there is a lot of jitter
–
When the zoom magnification is high
–
When using the Digital Zoom
–
When taking pictures while following a moving subject
–
When the shutter speed becomes slower to take pictures indoors or in dark places
•
The panning effect in [
–
In brightly lit places such as in broad daylight on a summer's day
–
When the shutter speed is faster than 1/100th of a second
–
When you move the camera too slowly because the subject is moving slowly (The
background will not become a blur)
–
When the camera does not keep up with the subject satisfactorily
Not available in these cases:
•
Even when [Stabilizer] is set to [
Shot], the setting will change to [
•
In the following cases, the [Stabilizer] will switch to [
(Panning):
–
When recording motion pictures
–
When recording 4K photos
–
When recording with the Post Focus function
•
The 5-Axis Hybrid Image Stabilizer function is not available in the following cases:
–
When using the Digital Zoom
] is more difficult to achieve in the following cases.
] (Normal), if you set Scene Guide Mode to [Panorama
] (Panning).
147
] (Normal), even if it is set to [
]
Advertisement
Table of Contents
