Table of Contents
Advertisement
16
ASSEMBLING AND PREPARING
Using Video Call Camera
Front
Microphones
Activity Indicator
Lens
Stand
Product Handling
Do not let the camera get wet. Liquid getting into the
y
camera could cause a short circuit.
Wipe the camera gently with a dry cloth to remove any
y
dust or dirt. If the product is very dirty, spray a mild
detergent on the cloth first.
Do not clean with thinner, alcohol, benzene, or any other
y
volatile agent. These may damage the product's surface
or affect its operation.
Do not disassemble, repair or alter the product. Incorrect
y
disassembly may cause a fire, electric shock, or injury.
Do not shake the camera.
y
Do not pull on the cable.
y
Rear
USB Cable
Stand-Arm
Stand-Bottom
Installation Instructions
Make sure you have enough space for connections when
y
installing the product.
Do not install in a dusty, dirty, or moist area.
y
Do not install in direct sunlight or near a heat source.
y
Magnetic objects, such as speakers, may interfere with
y
the camera's operation.
Install the product in a place with moderate temperature
y
and humidity. The recommended temperature range is 0
°C (32 °F) to 40 °C (104 °F).
Strong electromagnetic waves from other devices could
y
interfere with the camera's operation.
Remove all the protective plastic bags (Vinyl) before use.
y
The product and company names contained in this manual
may or may not be registered trademarks or copyrights, and
are only used for identification or explanatory purposes. All
trademarks reserved.
Stand-Cable holder
Advertisement
Table of Contents
