Related Manuals for LG 55EA980T
Summary of Contents for LG 55EA980T
- Page 1 OWNER’S MANUAL Please read this manual carefully before operating your set and retain it for future reference. 55EA980T www.lg.com P/NO : MFL67653164 (1310-REV00)
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. WARNING/CAUTION Heed all warnings. Follow all instructions. RISK OF ELECTRIC SHOCK DO NOT OPEN Do not use this apparatus near water. - Page 3 IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on or pinched CAUTION concerning the Power Cord particularly at plugs, convenience receptacles, and the point (Can differ by country): where they exit from the apparatus. It is recommended that appliances be placed upon a dedicated circuit;...
- Page 4 If you smell smoke or other odors coming from the TV, Do not attempt to modify this product in any way without unplug the power cord and contact an authorized service written authorization from LG Electronics. Unauthorized center. modification could void the user’s authority to operate this Keep the product away from direct sunlight.
- Page 5 IMPORTANT SAFETY INSTRUCTIONS Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
-
Page 6: Viewing 3D Imaging
Cautions when using the 3D glasses Do not watch 3D contents when you feel fatigue from lack Make sure to use LG 3D glasses. Otherwise, you may not of sleep, overwork or drinking. be able to view 3D videos properly. -
Page 7: Licenses
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to ‘opensource@lge.com’. -
Page 8: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS MAGIC REMOTE CONTROL FUNCTIONS Viewing 3D Imaging Registering Magic Remote Control How to use Magic Remote Control LICENSES Precautions to Take when Using the Magic Remote Control OPEN SOURCE SOFTWARE NOTICE WATCHING TV Turning the TV on for the First time TABLE OF CONTENTS... -
Page 9: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEdURE Open the package and make sure all the accessories are included. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING ANd PREPARING Unpacking Check your product box for the following items. - Page 10 ASSEMBLING AND PREPARING Magic Remote Control, Owner’s Manual Polishing cloth Batteries (AA) Use this to remove dust from the (See p. 28) cabinet. Cable Management AV cover Video call camera (See p. 15) (See p. 14) (See p. 16) Cinema 3D Glasses Cable Band Cable Management Screw The number of 3D glasses may differ...
-
Page 11: Optional Extras
These devices only work with certain models. The model name or design may be changed manufacturer’s circumstances or policies. AN-MR400 AG-F*** AG-F***DP Magic Remote Cinema 3D Glasses Dual Play Glasses Tag On LG Audio Device Tag On AN-VC5** Video Call Camera... -
Page 12: Parts And Buttons
ASSEMBLING AND PREPARING Parts and Buttons Screen LG Logo Light Clear Speaker Remote control sensor Speakers Smart Touch Button Button Description Turns the power on or off. -
Page 13: Using The Smart Touch Button
Using the Smart Touch Button To Turn the TV On - Gently press the smart touch button just below the LG logo light at the bottom of the TV. To Turn the TV Off - If the touch menu is not displayed on the screen, press the smart touch button for about two seconds. -
Page 14: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and Moving the TV Setting up the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation Attaching the AV cover regardless of its type and size. Please assemble the AV cover as shown in the figure. -
Page 15: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a Table Tidying Cables Lift and tilt the TV into its upright position on a table. Fix the Cable Management with screw and arrange the cables. - Leave a 10 cm (minimum) space from the wall for proper 10 cm ventilation. -
Page 16: Using Video Call Camera
ASSEMBLING AND PREPARING Using Video Call Camera Front Rear Microphones USB Cable Activity Indicator Lens Stand-Arm Stand-Bottom Stand Stand-Cable holder Product Handling Installation Instructions Do not let the camera get wet. Liquid getting into the Make sure you have enough space for connections when camera could cause a short circuit. -
Page 17: Preparing Video Call Camera
ASSEMBLING AND PREPARING Preparing Video Call Camera Unfold the stand and put it on the top center of the TV set. Insert the video call camera’s cable into the cable holder. Please open the USB Camera Cover for video call camera’s cable connection.The camera shall be connected to the CAM terminal as shown in the figure. -
Page 18: Making Connections
MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device. -
Page 19: Connecting To A Hd Receiver, Dvd Player Or Vcr
MAKING CONNECTIONS Connecting to a HD receiver, DVD Player or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. -
Page 20: Dvi To Hdmi Connection
MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. NOTE When using the HDMI/DVI cable, Single link is only supported. -
Page 21: Connecting To A Mobile Phone
MAKING CONNECTIONS Connecting to a Mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. NOTE Connect the mobile phone to the HDMI / DVI IN 4 (MHL) port to view the phone screen on the TV. This only works with an MHL-enabled phone. -
Page 22: Component Connection
MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. Check to ensure the cables are matched with the corresponding color connection. -
Page 23: Composite Connection
MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. Check to ensure the cables are matched with the corresponding color connection. -
Page 24: Connecting A Pc
MAKING CONNECTIONS Connecting a PC NOTE It is recommended to use an HDMI connection for the best image quality. Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. - Page 25 MAKING CONNECTIONS Method B: dVI to HdMI Connection Choose any HDMI input port to connect. It does not matter which port you use. (*Not Provided) YELLOW (*Not Provided) AUDIO OUT DVI OUT...
-
Page 26: Connecting To An Audio System
MAKING CONNECTIONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. -
Page 27: Connecting Headphones
MAKING CONNECTIONS Connecting Headphones Listening to sound with headphones NOTE AUDIO menu options are disabled when headphones are connected. When changing AV MODE with a headphone connected, the change is applied to video but not to audio. Optical Digital Audio Out is not available when connecting a headphone. Headphone impedance: 16 Ω... -
Page 28: Magic Remote Control Functions
MAGIC REMOTE CONTROL FUNCTIONS MAGIC REMOTE CONTROL FUNCTIONS When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. -
Page 29: Registering Magic Remote Control
MAGIC REMOTE CONTROL FUNCTIONS Registering Magic Remote Control The Magic Remote Control operates by pairing with your TV. Please register the remote as follows. How to register the Magic Remote Control To register automatically, turn the TV on and press Wheel (OK). -
Page 30: Watching Tv
WATCHING TV WATCHING TV When the basic settings are complete, Turning the TV on for the First time press the Wheel (OK). NOTE When you turn the TV on for the first time, the Initial setting If you do not complete the Initial setting, it will appear screen appears. -
Page 31: Using The User Guide
An index of key words present in the User Guide. Provides the detailed information on the functions of LG Smart TV when the Internet is connected. (It may not be available depending on the country/ language.) -
Page 32: Specifications
0 - 40 °C condition Operating Humidity Less than 80 % Storage Temperature -20 - 60 °C Storage Humidity Less than 85 % 55EA980T MODELS (55EA980T-DA) Dimensions 1,227 x 798.5 x 192 (mm) (W x H x D) Weight 17.2 Kg Current Value / Power consumption 2.70 A / 270 W... - Page 33 SPECIFICATIONS HDMI (DTV) supported mode Component port connecting information Component ports on the Horizontal Vertical Frequency Resolution Frequency (kHz) (Hz) 640 x 480 31.469 / 31.5 59.94 / 60 Video output ports 720 x 480 31.469 / 31.5 59.94 / 60 on DVD player 31.25 720 x 576...
- Page 34 SPECIFICATIONS Video Camera information AN-VC5** MODELS (Video Camera) Dimensions (Width x Height x Depth) 112 x 56 x 38 (mm) Weight 107.8 g Focus More than 100 cm Lens Field of Vision 61.25° in diagonal Video Effective pixels 1920 x 1080 Output format H.264, MJPEG, YUV Output Image...
- Page 35 SPECIFICATIONS 3D supported mode Video, which is input as below media contents is switched into the 3D screen automatically. The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images. 3D supported mode automatically Horizontal Frequency Vertical...
- Page 36 SPECIFICATIONS 3D supported mode manually Signal Input Verticla Playable 3D video format Horizontal Resolution Frequency Frequency (kHz) (Hz) HD / SD ATV(CVBS) Component HD / SD 2D to 3D, S/S (Half), T/B 1024 x 768 48.36 1360 x 768 47.71 HDMI-PC 2D to 3D, S/S (Half), T/B, C/B, 1920 x 1080...
-
Page 37: Maintenance
» Otherwise, this may cause damage to the product, such as corrosion. Power cord Remove the accumulated dust or dirt on the power cord regularly. ExTERNAL CONTROL dEVICE SETUP To obtain the external control device setup information, please visit ‘www.lg.com’. - Page 38 TROUBLESHOOTING TROUBLESHOOTING Problem Solution Check the remote control sensor on the product and try again. Cannot control the TV with the remote Check if there is any obstacle between the product and the remote control. control. Check if the batteries are still working and properly installed ( Check if the product is turned on.
- Page 40 The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL...
-
Page 41: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... -
Page 42: Note
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button Q.Menu R/C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R/C Button... -
Page 43: Image Shown May Differ From Your Tv
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals. - Page 44 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) RS-232C with RS-232C Cable (Legacy) RS-232C IN Phone jack Type (CONTROL & SERVICE) (PC) (TV) • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and RS-232C IN (CONTROL &...
- Page 45 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
- Page 46 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 47 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute ► To control Power Off of the set. on, TV will not display OSD.
- Page 48 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) ► To adjust the screen tint. ► To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64...
- Page 49 EXTERNAL CONTROL DEVICE SETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 00 : xx (Don't care) Data 02 : Input Source (Digital)
- Page 50 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number 20. Control Back Light (Command: m g) Data 01: High byte Channel Data • For LCD TV / LED TV Data 02: Low byte Channel Data ► To control the back light. - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) Transmission [m][g][ ][Set ID][ ][Data][Cr] [Data 03][Data 04]: Minor/Branch Channel Number...
- Page 51 11 11 EXTERNAL CONTROL DEVICE SETUP 22. 3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) ► To change 3D option for TV. ► To change 3D mode for TV. Transmission [x][v][ ][Set ID][ ][Data 00][ ] Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [Data 01][Cr]...