Saving A User's Logo Image - Epson EH-TW650 User Manual

Saving a User's Logo Image

You can save an image on the projector and display it whenever the projector
turns on. You can also display the image when the projector is not receiving
an input signal or when you temporarily stop projection (using A/V Mute).
This image is called the user's logo screen.
You can select a photo, graphic, or company logo as the user's logo, which is
useful in identifying the projector's owner to help deter theft. You can prevent
changes to the user's logo by setting up password protection.
• Once you save a user's logo, you cannot return to the factory default
a
logo.
• If the User's Logo Protection setting is set to On in the Password
Protection setting menu, set to Off before saving the user's logo.
• When you copy the menu settings from one projector to another
using the batch setup feature, user's logo is also copied. Do not
register the information that you do not want to share between
multiple projectors as a user's logo.
a
Display the image you want to project as the user's logo.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Extended menu and press [Enter].
d
Select User's Logo and press [Enter].
You see a prompt asking if you want to use the displayed image as a
user's logo.
Adjustments such as Keystone, E-Zoom, or Aspect are
a
temporarily canceled when you select User's Logo.
e
Select Yes and press [Enter].
You see a selection box overlaying your image.
Depending on the current image signal, the screen size may
a
change to match the resolution of the image signal.
67