Jack And Connector List; Connector Types - Yamaha MG12XUK Owner's Manual

Jack and Connector List

Jacks and Connectors
MIC/LINE, STEREO OUT
MIC/LINE*, AUX SEND,
MONITOR OUT, STEREO OUT
PHONES
LINE (stereo input channels)
These jacks also can be connected with TS phone connectors. If you use TS phone connectors, the connection will be unbalanced.

Connector Types

XLR
This 3-pin connector is resistant to externally induced noise, and is used pri-
marily for balanced connections. With properly designed receiving circuitry,
cables with this type of connector can also be used for unbalanced signals.
XLR type connectors are the standard for microphone connections as well as
most professional audio gear.
Phone
Phone connectors are available in TRS and TS types. TRS types are used for
stereo headphone jacks, insert jacks, and also for carrying balanced signals in
many cases. TS types are used to carry unbalanced signals -for example,
electric guitar cables.
RCA Pin
This type of unbalanced connector is most commonly found on home audio
and video equipment. RCA type pin jacks are often color coded: white for left
audio channel and red for right audio channel, for example.
Polarities
Pin 1: Ground
Pin 2: Hot (+)
Pin 3: Cold (–)
Tip: Hot (+)
Ring: Cold (–)
Sleeve: Ground
Tip: L
Ring: R
Sleeve: Ground
Tip: Hot
Sleeve: Ground
Configurations
INPUT OUTPUT
XLR Jack
Ring
Sleeve
TRS Phone Connector
Sleeve
TS Phone Connector
Male
Female
TRS Phone
TS Phone
Red
Technical Specifications
Tip
Tip
White
23
MG12XUK Owner's Manual