LG WF-HD200GV Owner's Manual page 39

S
martDiagnosis
1
Close the washer door, and press the POWER (AUTO OFF) button.
2
Place the phone to SMARTDIAGNOSIS
3
he rating plate. he rating plate.
Long press
e in e in
duct. duct.
sound, spin sound, spin
4
Hold the phone while data is transmitted.
ment of drain. ment of drain.
the pump and the pump and
ossible defects ossible defects
5
After the data transmission is completed, listen to the diagnosis result from the consultant.
ning center, ning center,
ransportation ransportation
part, shall be part, shall be
WATER TEMP
. button to activate smart diagnosis.
TM
• If you manipulated other button or dial before
pressing WATER TEMP. button, turn off the
power and start again from the beginning.
TM display.
• Make sure that the
speaking side of the
phone to face
SMARTDIAGNOSIS
display
• Place the phone near the
SMARTDIAGNOSIS
display, and long press
WATER TEMP. button
until tak tatk tak sounds.
• Keep placing phone to SMARTDIAGNOSIS
display while data for smart diagnosis is being
transmitted. The time remaining for data
transmission will be displayed on screen.
• Transmission sound may be irritating. For
proper diagnosis, do not take off the phone.
You can press power button to stop diagnosis
function and the sound.
• When data transmission is completed, the
power is automatically turned off with End
display after a few seconds.
TM
TM
39
TM