Table of Contents
Advertisement
• It only operates in COTTON/NORMAL Program.
• During being detected by the sensor, the LED flashes green, orange and red in turn. And, after detecting, the LED
lights a specific color according to the detecting condition as follows:
If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing time/strength,
and the LED automatically turns to red.
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by
increasing washing time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and the
LED turns to green.
DELAY START (RESERVATION) BUTTON
• Use to set a delayed finishing time.
• The time increases when the button
is pushed.
• The following settings are indicated
as the button is pushed 3 4
... 11
12
14
16
HOUR.
• To cancel delay time, turn the power
switch off.
(refer to page 26)
* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use
TUB CLEAN course to clean the tub. (refer to page 23)
* Even if the water level is changed by the user in COTTON/NORMAL Program,
the sensor will still work. The sensor algorithm may differ according to models.
* The control panel may differ according to different models.
WASHING CONDITION INDICATOR (OPTION)
PROGRAM BUTTON
• Use for selecting wash program.
• This button allows you to select 12
different programs for different kinds of
laundry and dirtiness.
• program selections light up in sequence as
5
COTTON/NORMAL
18 3
SANITARY
ECO COTTON
BULKY/BEDDING
TOWELS
FAVORITE Select the desired program
by pressing the button.
• It marks the place to put the
phone to receive signal when a
problem occurs.
POWER (AUTO OFF)
• Use to turn the power on or off.
• Push again and power goes on or off
• The power goes off automatically
about 10 seconds after the wash is
finished.
STAIN CARE
SMART CLEANING
QUICK WASH
SPORTS WEAR
WOOL
TUB CLEAN
SMARTDIAGNOSIS
TM
FUNCTION DISPLAY
BUTTON
START/PAUSE BUTTON
• Use to start or pause the
washing process.
• Repeats start and pause by
pushing the button.
15
Advertisement
Table of Contents
