Epson C11CF39403 User Manual page 30

Note:
For your safety, Epson recommends operating the printer with the printer cover closed. The printer
will function with the printer cover opened or removed, but maximum safety and print speed are
achieved when the cover is closed.
12. Turn on the printer. When the printer receives data, it automatically loads the paper and starts
printing.
13. After you finish printing, follow the steps in "Removing continuous paper" on page 42 to remove
your printed document.
If the first line on your page appears too high or low, you can change its position by using the Micro
Adjust function as described in "Adjusting the top-of-form position" on page 56.
Caution:
!
Never use the knob to adjust the top-of-form position; this may damage the printer or cause it to
lose the top-of-form position.
Removing the tractor from the front push position
Follow these steps to remove the tractor from the front push position:
1. Make sure the printer is turned off.
2. Remove any paper from the tractor as described in "Removing continuous paper" on page 42.
3. Press the tractor's lock tabs, tilt the tractor up, and lift it out of the printer.
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User's Guide
Paper Handling 30