Cancelling Printing - Epson C11CF39403 User Manual

Table of Contents

Paper type

Continuous paper

Single sheet

❏ If you use single sheets, you need to load a new sheet of paper each time the printer ejects a printed

sheet from the sheet guide.

❏ The setting instructions are printed in the language that you set in the Default Setting mode. If you

want to change the language of the setting instructions, change the language setting by changing the

default setting. See "Changing default settings" on page 98 for instructions on changing the default

setting.

Follow the steps below to perform bidirectional adjustment.

1. Make sure paper is loaded and the printer is turned off.

Caution:

Whenever you turn off the printer, wait at least five seconds before turning it back on;

otherwise you may damage the printer.

2. While holding down the Pause button, turn on the printer. The printer enters the bidirectional

adjustment mode and then prints instructions and the first set of alignment patterns.

3. As described in the instructions, compare the alignment patterns and select the pattern with the

best alignment. Then select the pattern with the best alignment for each of the remaining sets of

alignment patterns.

4. After you select the best pattern in the final set of alignment patterns and save your selection by

pressing the Tear Off/Bin button, turn off the printer and exit the bidirectional adjustment mode.