Status Screen - NETGEAR WN3000RP User Manual

Universal WiFi Range Extender WN3000RP

Status Screen

When you connect to http://www.mywifiext.net, after the automatic firmware check, the Status
screen displays. You can also select Status from the menu to display this screen:
This screen shows the current settings and the status of your range extender.
• You can click Show Statistics to see device performance statistics such as the number
of packets sent and number of packets received for each port. See
page 19.
• The following table describes the fields in the Status screen.
Table 1. Status Settings
Field
Hardware Version
Firmware Version
GUI Language Version
Connection Status to
Existing Network
FPO
Name (SSID)
Connection Status
Link Rate
Description
The hardware version of the range extender.
The current firmware version of the range extender. If you
upgrade the firmware, this field changes.
The language version running on the range extender. If
you upgrade the firmware, this field changes.
Your range extender is set up to connect to this SSID,
also called the wireless name.
The status of your wireless connection (connected or
disconnected).
The actual transmission (Tx) and receive (Rx) link rate in
the current wireless connection.
Chapter 2. Range Extender Network Settings
Show Statistics on
| 17