The display shows (e.g. E51).
1) After maximum 5 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
If the drying results are not satisfactory
•
The set programme was incorrect.
•
The filter is clogged.
•
The condenser is clogged.
•
There was too much laundry in the appliance.
•
The drum is dirty.
•
Incorrect setting of the conductivity sensor
( See chapter "Settings - Adjustment of the
TECHNICAL DATA
Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Sound power level
Necessary fuse
Total power
Energy efficiency class
Energy consumption on the standard cotton pro-
gramme with the full load.
Energy consumption on the standard cotton pro-
gramme with the partial load.
Annual energy consumption
Left-on mode power absorption
Off mode power absorption
Type of use
14
Problem
1)
2)
3)
4)
4)
Possible solution
Deactivate and activate the appliance. Start a
new programme. If the problem occurs again,
contact the Service.
remaining laundry moisture degree " for better
setting).
•
The airflow slots are clogged.
•
Room temperature is too low or too high
( optimal room temperature 19°C to 24°C )
850 x 600 x 600 mm (maximal 665 mm)
1090 mm
950 mm
850 mm (+ 15 mm - feet regulation)
118 l
8 kg
230 V
50 Hz
66 dB
13 A
900 W
A+
2,60 kWh
1,38 kWh
308,20 kWh
0,50 W
0,50 W
Household