Miele SKCP3 Operating Instructions Manual page 31


When vacuuming, in particular fine dust, e.g. sawdust,
sand, plaster, flour, talcum powder etc., electrostatic
charges build up naturally. Under certain conditions these
charges will be released. To avoid the unpleasant effects of
these discharges, a metal inlay has been incorporated into
the underside of the handle. Please make sure that you
keep your hand in constant contact with this metal strip
during vacuuming. If your vacuum cleaner is fitted with an
handle, make sure you hold it by the bowed
Eco Comfort
section as this is where this metal strip is incorporated.

Repairs should only be carried out by a Miele authorised
service technician. Repairs and other work by unqualified
persons can cause considerable danger to users.
Cleaning

Do not immerse the vacuum cleaner or any accessories
supplied with it in water.

Clean the vacuum cleaner and accessories only with a
dry cloth or slightly damp cloth. Exception:
– Dust container / fine dust container: clean only with wa-
ter and a little mild washing-up liquid then dry thor-
oughly.
– Fine dust filter: do not clean the inside of the fine dust
filter. Rinse the outside under running cold water. Do not
use washing-up liquid. Do not use any sharp or pointed
objects and do not brush the fine dust filter. After clean-
ing, leave the fine dust filter to dry for a minimum of
24 hours before placing it back in the fine dust con-
tainer.
en - Warning and Safety instructions
31