Simpson PS60995 Instruction Manual page 11

J. Pump Inlet
K. Quick Connect Nozzles
L. Nozzle Holder
BASIC ELEMENTS OF AN ENGINE
Refer to the Engine Owner's Manual for location and operation of engine controls.
Choke Control: Opens and closes carburetor choke valve.
Starter Grip: Pulling starter grip operates recoil starter to crank engine.
Engine Switch: Enables and disables ignition system.
1. Locate and remove all loose parts from the carton.
2. Cut four corners of the carton from top to bottom and lay the panels flat.
3. (Figure 2) Slide the handle assembly (G) onto the frame (H)and secure with
saddle bolts and knobs.
OR
(Figure 2A) Align holes in the top handle (S) with the mounting holes in the
3.
handle assembly (G). Insert saddle bolts (DD) through aligned holes and
secure top handle to handle assembly with knobs (EE). Tighten until snug.
NOTICE: Risk of personal injury. Avoid placing hands between handle and frame
when assembling to prevent pinching.
2
G
H
4. Remove the colored quick-connect nozzles (K) from the plastic bag and insert
them into correct grommet on the nozzle holder (L). Nozzles are color coded
to match colored nozzles on label.
5. Connect wand (E) to gun (D). Tighten securely.
ASSEMBLY INSTRUCTIONS (FIG. 2–4)
2A
G
H
2B
K
G
EE
L
11 - ENG
S
DD