Table of Contents
Advertisement
Connections (Continued)
Assembling and Connecting to
the Speakers
The front and rear speakers are detached from the
speaker stands. Connect the speaker cords and
assemble the front and rear speakers from speaker
stands as illustrated.
Connect the speaker cords to the appropriate termi-
nals on the bottom of each front and rear speaker.
After connecting the speaker cords to the appropriate
terminals on the bottom of each front and rear
speaker and attach the front and rear speakers to
the speaker stands.
otes
Be sure to match the speaker cable to the appropriate ter-
minal on the components: + to + and – to –. If the cables
are reversed, the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating,
adjust the volume carefully to avoid excessive output on the
speakers.
Do not remove the front cover of supplied speaker.
10
Speaker System Connection
Connect the speakers using the supplied speaker
cords.
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
Front speaker
(Right)
Rear speaker
Center speaker
(Right surround)
Subwoofer
To hang the speaker on a wall
You can hang the Speaker on a wall.
1
Attach the bracket by rotating the screw on the rear
of the Speaker.
2
Hang it via hole on the rear side of the Speaker on
the screw.
Front speaker
(Left)
Rear speaker
(Left surround)
Advertisement
Table of Contents
