Adding Extra Rinse Cycle, Extra Rinse; Adding Extra Water To The Washing And Rinse Cycle, Water Plus; Presetting The Start Time, Delay Wash; Improved Stain Treatment, Stain Care - LG WM3150HVC Owner's Manual

4.3 cu.ft. ultra-large capacity front load washer with coldwash™ technology
Hide thumbs Also See for WM3150HVC:
Table of Contents

Advertisement

Available languages

Available languages

Adding extra rinse cycle,
You can add an extra rinse cycle to the default rinse cycle.
B
A
1
Press
and turn
to the desired cycle.
2
Press
.
-
light will turn on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
C
4
Press
.
Adding extra water to the washing and
rinse cycle,
WATER PLuS
You can rinse the load more thoroughly by adding extra water
to the washing and rinse cycle.
B
1
A
Press
and turn
to the desired cycle.
2
Press
.
-
light will turn on.
3
Press the desired option button to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
C
Press
EXTRA RINSE
USING YOUR WASHING MACHINE
Presetting the start time,
You can set the desired start time.
B
A
1
Press
and turn
to the desired cycle.
2
Press the desired option to use the other options.
3
Press
repeatedly to select the desired start
time.
-
light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay time by
one hour, up to 19 hours.
C
4
Press
.
Improved stain treatment,
Use this option for heavily soiled loads that need improved
stain treatment. When STAIN CARE is selected, the water
temperature for the selected cycle will begin as warm water
to help prevent the setting of certain types of stains. Then
as the cycle progresses, the water will be heated to higher
temperatures to help remove stains that require treatment
at higher temperatures. This option is designed for optimum
stain removal.
B
A
1
Press
and turn
to the desired cycle.
2
Press
. The washer will automatically adjust the cycle
settings.
3
Set any other desired options.
C
4
Press
.
NOTE
y If STAIN CARE is selected with the SANITARY cycle,
the cycle will begin with very hot water since that is
default for that cycle and cannot be changed.
27
DELAY WASH
STAIN CARE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm3150h series

Table of Contents