Advertisement
Contents
Connections
o Now Playing
Sets the display time for the playback display when the input source is
"Online Music", "iPod/USB", "Bluetooth" or "HD Radio".
Always On
(Default):
Auto Off:
Front panel
Display
Playback
Show display continuously.
Show display for 30 seconds after
operation.
Rear panel
Settings
TV Format
Set the video signal format to be output for the TV you are using.
o Format
NTSC
(Default):
PAL:
0 "Format" can also be set by the following procedure. However, the menu
screen is not displayed. Following the display content to make the setting.
1. Press and hold the main unit's STATUS and ZONE SELECT at the same
time for at least 3 seconds.
"Video Format <NTSC>" appears on the display.
2. Use the main unit's o or p and set the video signal format.
3. Press the main unit's ENTER to complete the setting.
NOTE
0 When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
223
Remote
Tips
Appendix
Select NTSC output.
Select PAL output.
Index
Advertisement
