Function
► Fresh Contrast : Adjusts contrast to optimum levels depending on image brightness.
•Fresh Contrast
ꔗ
► Fresh Colour : Adjusts image colors close to natural colors.
ꔗ
•Fresh Colour
► Color Temp : Selects the mood of screen colors.
ꔗ
• Color Temp.
• You can also use the C.TEMP button on the remote control.
► Noise Reduction : Removes noise from image without damaging it.
• Noise Reduction
ꔗ
• You can use it only in Video, S-Video, Component(480i, 480p, 576i, 576p) and HDMI(480p, 576p) modes.
► Gamma : Sets the intensity of the picture.
• Gamma
ꔗ
• You can also use the GAMMA button on the remote control.
► Real Cinema : Set up the picture for the best picture appearance for viewing movies.
• Real Cinema
ꔗ
• You can use it only in Video, S-Video, Component(480i/576i/1080i 50/60Hz, 1080p 24Hz) and
HDMI(1080i 50/60Hz, 1080p 24Hz) modes.
► Black Level : Adjusting the contrast and the brightness of the screen using the black level of the screen.
ꔗ
• Black Level
• You cannot set this function in SECAM, PAL 60 and PAL BGDK signals of Video, S-Video and RGB modes.
► Lamp Mode : Adjusts the lamp brightness.
ꔗ
• Lamp Mode
► Overscan : You can adjust from 90, 92, 94...100.
• Overscan
ꔗ
• This function cannot be set when PC signal is input, the signal is 1080i and 1080p or Aspect Ratio is set as Justscan.
• Noise can occur at the edges of the screen at the signal of 1080i/1080p because of the malfunctioning of an image input
device. In this case, change the signal into the one that can be set with Overscan and set Overscan.
22
Low
ꔃ
ꔗ
ꔉ
OK
ꔃ
ꔗ
Off
ꔉ
OK
ꔃ
ꔗ
Medium
ꔉ
OK
ꔃ
ꔗ
On
ꔉ
OK
ꔃ
ꔗ
Low
ꔉ
OK
Off
ꔃ
ꔗ
ꔉ
OK
ꔃ
ꔗ
Low
ꔉ
OK
ꔃ
ꔗ
High
ꔉ
OK
ꔃ
~
ꔗ
90
ꔉ
OK
High
ꔃ
ꔗ
ꔃ
ꔗ
Low
ꔃ
ꔗ
Cool
Natural
ꔃ
Off
ꔃ
ꔗ
Medium
On
ꔃ
ꔃ
High
ꔃ
Low
ꔃ
100
Off
ꔃ
ꔃ
High
ꔃ
ꔗ
Warm
ꔃ
High
ꔃ