Operating Elements; Input Sensitivity - Renegade RS800A Operation Manual

ENG

OPERATING ELEMENTS

INPUT SENSITIVITY

Turn the volume controller of your head unit to the center medium position and then turn up the INPUT LEVEL controller ( 2 )
until you have an average medium level without distortion. This setting usually provides sufficient power reserves at optimum
weighted signal-to-noise ratio.
LOWPASS FILTER
Set the desired crossover frequency of the low pass filter by using the LOW PASS controller ( 4 ). Hence, only the frequencies
below the chosen crossover frequency will be amplified and the subwoofer plays more precisely and efficient.
BASS BOOST
By using the BASS BOOST controller ( 3 ) you are able to increase the bass boost level from 0 dB to 12 dB.
Caution: Please use the bass boost with care.
BASS LEVEL REMOTE CONTROLLER
Connect the included Bass Level Remote Controller at the REMOTE CONTROL input ( 1 ). This allows you to control the bass
level f.e. out of the driver's seat.
PHASE
The PHASE switch ( 5 ) allows you to set the phase between 0° or 180° to match the output signal with the vehicle's interior
acoustic and the loudspeakers of the sound system.
4 3 2
5 1
10