LG multi V JRUN Series Installation Manual page 96

Static pressure compensation mode
This function secures the air flow rate of ODU, in case static pressure has been applied like using duct at
fan discharge of ODU.
Static pressure compensation dip S/W setting method
High static pressure mode : Set DIP S/W
Static pressure compensation mode setting
method
Set the DIP S/W ON
Power Reset
Static pressure compensation mode is set
Warning : Please reset SVC (Heat Pump)/ Main PCB (Cooling only)before starting this function
Static pressure compensation mode cancellation
DIP switch OFF
Static pressure compensation mode is cancelled
DIP Switch Settings
method
Power Reset
Installation Manual 97
Test Run