Set Temperature Alerts; Arm/Disarm Temperature Alerts - La Crosse Technology 308-1414MBv2 Instructional Manual

Tip: Setting the alerts is one step. Arming the alerts is a separate step (see below)
• Hold the ALERTS button for 3 seconds until the remote HI alert value flashes.
• Press and release the ARROW buttons to adjust the value. Hold to adjust quickly.
• Press and release the ALERTS button to confirm and move to the next alert.
Alert order:
1. Remote HI
2. Remote LO
3. Indoor HI
4. Indoor LO
Remote HI Alert
Indoor HI Alert
1. Press and release the ALERTS button so the remote HI alert temperature shows and the word HI flashes.
• Press UP ARROW to arm
• Press DOWN ARROW to disarm
2. Press and release the ALERTS button to confirm and move to the remote LO, indoor HI and indoor LO
alerts.
3. A bell appears above and alert when armed.
4. If no alerts are active, OFF will show.
HI alert armed
Wireless Color Weather Station

Set Temperature Alerts

Arm/Disarm Temperature Alerts

LO alert armed
Remote LO Alert
Indoor LO Alert
Alerts OFF
Page | 7