Advertisement
5
Important
Before the installation, please make sure the installation surface can sustain at
least 3X weight of the bracket and the camera.
Before you install the bracket, please pull the cable through the cable exit of the
bracket chassis.
•
install the expansion bolt if you want to install in cement wall (make sure
the installation holes of the expansion bolts are the same as the bracket) and
then you can install the bracket.
•
If you want to install in a wood surface, please skip the first step and then
use the self-tapping screws to install the bracket directly
Step 2
Unscrew the M3 x 20 and M3 x 5 screws on the bracket and adjust the camera
to the exact location which needs to be monitored by rotating the bracket and
camera body, then secure the bolts.
Bullet Installation
2 Megapixel Camera
Advertisement
