Table of Contents
Advertisement
Activating/deactivating the handset
a
Press and hold the
key to activate or deactivate the handset. If you place a deactivated handset in the base station
or charging cradle, it will automatically activate after approx. 30 seconds.
Your phone is now ready for use.
If you have any questions about using your phone, please read the tips on troubleshooting ("Questions and answers",
¢
page 18) or contact our Customer Care team
Menu guidance
Your telephone's functions are accessed via a menu consisting of several levels (menu overview
Main menu (first menu level)
¤
When the handset is in idle status, press the display key
The functions in the main menu are shown by means of an icon and the function's name.
Selecting a function:
¤
You can scroll between functions using the control key
¤
Press the display key
submenu and the first entry is displayed.
If you press the display key
Submenus
The functions in the submenu are indicated by name.
Selecting a function:
¤
You can scroll between functions using the control key
¤
Press the display key
is displayed.
If you press the display key
the operation.
Any settings you have not confirmed by pressing the display key
Reverting to idle status
From any point in the menu:
¤
Press and hold the end call key
¤
Do not press any key: after 2 minutes, the display will automatically revert to idle status.
Making calls
Making external calls and ending calls
External calls are calls using the public telephone network.
~
(Enter the phone number)
The phone number is dialled. (Or you can first press and hold talk key
the call you can adjust the earpiece volume using
End the call/cancel dialling: Press the end call key
You can automatically insert a network provider dialling code before any phone number (
Accepting a call
The handset indicates an incoming call by ringing and by a display on the screen.
c
Press the talk key
to accept the call.
When Auto Answer is activated (see menu overview
charging cradle.
Calling Line Identification
When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is
stored in the directory.
Prerequisites:
1
You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen.
2
The caller has asked the network provider for his number to be identified (CLI).
External Call appears in the display if you have not requested CLIP, Withheld appears if the caller has withheld CLI, and
Unavailable appears if CLI has not been requested.
§OK§
or the right control key
"
or briefly the end call key
§OK§
to select the displayed function. This opens the corresponding submenu and the first entry
"
or briefly the end call key
a
or
¤ c
.
6
¢
page 20.
§Menu§
or right on the control key
q
. The function is shown in the display.
v
to select the displayed function. This opens the corresponding
a
, the display returns to idle status.
q
. The function is shown in the display.
a
, the display returns to the previous menu level or you cancel
§OK§
are lost.
c
t
and set the volume with
a
.
¢
page 22), simply remove the handset from the base station/
v
to open the main menu.
[dial tone] and then enter the number.) During
q
.
¢
page 7).
¢
page 21).
Advertisement
Table of Contents
