Timer Function; Thermostat Function - Kero-Sun TKRMC-15 Instruction Manual

• Place the heater on a level surface in a stable upright position.
• Ensure power switches are in the "O" (OFF) position and the thermostat is in the "•" (OFF) posi-
tion.
• Unwind the power cord and plug your heater into a power socket (following the instructions
regarding positioning).
Ensure the voltage on the specifi cation plate is the same as in your home and the power cord is
lying safely on the ground.
• Switch the heater "ON" by selecting:
Model: TKRMC-15
Heat Setting I: 1000W or
Heat Setting II: 500W or
Heat Setting I+II: 1500W or
Model: TKRMC-20
Heat Setting I: 1000W or
Heat Seeting II: 1000W or
Heat Setting I+II: 2000W
• The heater operates when both the power switch and thermostat function are activated. The red
indicator light will turn on.

TIMER FUNCTION

Switch the TIMER clockwise to set your desired working period (maximum 120 minutes).
Unplug the appliance from the mains when not in use. The cable can be wrapped around the
plastic cable tidy on the front panel.

THERMOSTAT FUNCTION

• Set the desired room temperature by turning the thermostat dial clockwise to the desired posi-
tion. You may adjust the temperature during use. To turn down the thermostat, turn the dial
anti-clockwise.
• To fi nd the ideal thermostat setting for you, fi rst set the knob to the "maximum" position. As soon
as the temperature is comfortable, turn the thermostat down slowly, until the heater turns off. The
heater will keep the surrounding air at this set temperature by switching on and off at intervals.
The indicator light lights up when the heater is on. It is suggested to set the knob between middle
and maximum position. In this way it will stop heating if the surrounding temperature is high and
it will restart its function when surrounding temperature starts to drop.
• To switch the heater off fully, turn the power switches to "0" and the thermostat to "•". The indica-
tor light will turn off also.
6
ENGLISH