Kero-Sun TKRMC-15 Instruction Manual page 5

ASSEMBLY INSTRUCTIONS
1. Position the heater carefully upside down.
2. Place and press the wheels to the hole , then place the screws in center round hole of the foot
base and screw in tightly with a screwdriver.
3. Repeat for other leg.
4. Turn the heater the right way up.
Positioning of the Heater
The heater should only be operated at a minimum distance of 1 meter from any wall or other ob-
ject. Position the air fl ow in order to optimize the heating of the room.
OPERATING INSTRUCTIONS
NOTE: When switched on for the fi rst time a slight odor may be emitted for a few minutes. This is
harmless and occurs with most appliances as slight traces of dust or lubricants may have collected
during manufacture.
Power Button
Timer Switch
Thermostat Control
Switch
5
ENGLISH