Connecting With An Hdmi Cable; Speaker Output Setup - LG 37LH200H Owner's Manual

ConneCting with an hDMi Cable

Connect the HDmi output of the external equipment (digital set-
1
top box, DVD, etc.) to hDMi/DVi in 1, hDMi 2 (except for
19/22lH2 *** ) jack on the tV.
turn on the external equipment.
2
( refer to the external equipment's manual for operating instruc-
tions.)
select hDMi1, hDMi2 (except for 19/22lH2 *** ) input source
3
using the inpUt button on the remote control.
note
► the tV can receive video and audio signals simultaneously when
using an HDmi cable.
► if the DVD does not support auto HDmi, you must set the output reso-
lution appropriately.
► Check that your HDmi cable is High speed HDmi Cable. if the HDmi
cables are not High speed HDmi Cable, flickering or no screen dis-
play can result. please use the High speed HDmi Cable.

Speaker oUtpUt SetUp

Connect the external speaker to the Speaker
1
oUtpUt(Stereo) jack on the tV.
Method of Volume control port
Cable
spec.
GnD / up / Down
• each up/ Down pin is
pulled to 3.3V with Cpu
GpiO.
• Cpu detects transition
from 3.3V to GnD level for
volume control.
/DVI IN
Control port for speaker out
2
1
1
/DVI IN
( RGB)
VOLUME CONTROL
STEREO
(8 )
SPEAKER
OUT
1
2
1
1
(RGB)
up
VOLUME CONTROL
DOWn
(8 )
SPEAKER
OUT
GnD
riGHt
leFt
GnD
3