NOTE: All cables shown are not included with the TV
When connecting with a S-Video cable
32, 37, 42 inch TV Back
AUDIO
R
S-VIDEO
COMPONENT1
R
L
AUDIO INPUT
VIDEO INPUT
1
DVD
S-VIDEO
(R) AUDIO (L)
Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set.
1
Connect the audio outputs of the DVD to the AUDIO input jacks on the set.
2
Turn on the DVD player, insert a DVD.
3
Select Video1 input source with using the TV/VIDEO button on the remote control.
4
- If connected to IN2 (or VIDEO2), select Video 2 input source.
Refer to the DVD player's manual for operating instructions.
5
When connecting with a HDMI cable
HDMI
1
CABLE
ANTENNA
DVD
HDMI-DVD OUPUT
Connect the HDMI output of the DVD to the HDMI
1
jack on the set.
Select HDMI input source with using the
2
TV/VIDEO button on the remote control.
3
Refer to the DVD player's manual for operating
instructions.
(MONO)
VIDEO
L
MONITOR
OUT
VIDEO1
2
32, 37, 42 inch TV Back
CableCARD
IEEE
1394
DVD Setup
OUTPUT
DVI INPUT
COMPONENT1 INPUT
1
HDMI-DVD OUPUT
• TV can receive the video and audio signal simulta-
neously with using a HDMI cable.
• If the DVD supports Auto HDMI function, the DVD
output resolution will be automatically set to
1280x720p.
• If the DVD does not support Auto HDMI, you need
to set the output resolution appropriately. To get the
best picture quality, adjust the output resolution of
the DVD to 1280x720p.
26 inch TV Back
HDMI
IEEE
1394
DIGITAL AUDIO
(OPTICAL)
COMPONENT1
1
2
(R) AUDIO (L)
S-VIDEO
26 inch TV Back
CableCARD
HDMI
IEEE
1394
COMPONENT1
DVD
DVD