LG M4630C Owner's Manual page 46

RS-232C
Transmission / Receiving Protocol
25. Tile Mode (Command 1: d, Command 2: d)
► Change a Tile Mode.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data (Hex)
Data
00, 11
12
13
...
FF
ex) Data 13 : Indicates that the H Tile is 1 and the V Tile is 3.
Except for 00, a value 0X or X0 cannot be used.
26. Tile mode check (Command 1: i, Command 2: a)
► Check the tile mode.
Transmission
[i][a][ ][Set ID][ ][Data][Cr]
The data is always FF (in Hexa)
27. H Size (Command 1: d, Command 2: g)
► To set the Horizontal position.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 14H (*transmit by Hexadecimal code)
If the H tile is set to 1, it does not work.
28. V Size (Command 1: d, Command 2: h)
► To set the Vertical position.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 14H (*transmit by Hexadecimal code)
If the V tile is set to 1, it does not work.
Controlling Multiple Products
IR Remote Key
Tile mode is off.
1 x 2 mode
1 x 3 mode
...
15 x 15 mode
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
A12