Table of Contents
Advertisement
Set Alarm:
1. Hold the ALARM button until the Alarm Hour begins to flash.
2. Press the ARROW buttons to adjust values, hold to adjust quickly.
3. Press the ALARM button to confirm and move to the Alarm Minutes.
4. Use the ARROW buttons again to adjust, and press ALARM to confirm and activate the alarm.
This station uses a crescendo alarm, which will increase in volume over time. If no buttons are pressed
within 2 minutes, it will shut off automatically.
Activate/Deactivate Alarm:
• Press and release the ALARM button to deactivate or activate the alarm. The alarm time will show for 2
seconds.
• Alarm Icon (bell) and ALARM ON will show when active.
• ALARM OFF will show when inactive.
Snooze:
• When alarm sounds, press the SNOOZE/LIGHT button to silence alarm for 10 minutes.
• The Alarm Icon Zz will flash
• Press any button except SNOOZE/LIGHT to silence the alarm for 24 hours
Your Backlight may be turned OFF and adjusted to 2 levels of brightness.
To adjust brightness:
•Press and release the HI/LOW/OFF button to adjust backlight brightness.
Set Alerts:
1. Hold the ALERTS button for 3 seconds.
2. The temperature alert value will blink in set mode.
3. Press and release the ▼ or ▲ buttons to adjust alert values.
4. Press and release the ALERTS button to confirm & move to the next alert.
The temperature alert order:
1. Outdoor High 2. Outdoor Low 3. Indoor High 4. Indoor Low
Press and release the ALERTS button to exit, or wait 20 seconds without pressing buttons to return to nor-
mal time display
W IRE LE S S COLOR WEAT HE R STAT I O N
A LARM
A DJU STA BL E B AC K L I G H T
T E MP E RAT U RE A L ERTS
5 | PAGE
Advertisement
Table of Contents
