LG N2210WZ-BF Owner's Manual page 34

34
Using PCoIP Solution
Display Tab
The Display tab allows the user to configure the
EDID function of the monitor.
NOTE
The Enable display override function can be
y y
used when the EDID function of the monitor
is not running.
Figure 2-15. Display Configuration
VMware View Tab
The VMware View tab allows the user to select the
device to use the VMware View Connection Server.
NOTE
The VMware View parameters can also be
y y
configured using the Webpage Administra-
tion Interface.
Figure 2-16. VMware View Configuration
y Enable VMware View
The Enable VMware View option allows the user to
configure the portal to use the VMware View Con-
nection Server.
NOTE
To enable the VMware View function, the
y y
Enable Connection Management check box
in the Enable Connection Management Tab
must be deselected.
y Identify Connection Server by
The Identify Connection Server by selector allows
the administrator to decide whether to identify the
connection manager by IP address or by FQDN. If
VMware View is disabled, this field is not required
cannot be edited.
y Port
The Port parameter allows the administrator to
specify the port to communicate with the VMware
View Connection Server.
y SSL
The SSL parameter allows the administrator to
specify the SSL to communicate with the VMware
View Connection Server.
y Auto Connect
The Auto Connect parameter allows the adminis-
trator to ensure that the device always automati-
cally connects to the VMware View Connection
Server when starting the portal.
Diagnostics Window
In the Diagnostics window, the administrator can
access the window tab to diagnose the portal. The
Diagnostics window has the following tabs:
y Event Log
y Session Statistics
y PCoIP Processor
y Ping
Each tab has the Close button to close the window.