Greencut GLM690X Instruction Manual page 75

2. Place, on both sides, the plastic tube spacer so that the curved section is positioned against the handle tube.
3. Place the lower handlebar bar locking handles on the outside and secure them until they are tight.
4. To secure the upper handlebar, first remove the two handlebar locking handles. Place the upper handlebar
on the lower bars, aligning the holes in the upper handlebar with the holes in the lower handlebar. Insert the
two locking handle screws through the lower handlebar and then through the holes in the upper handlebar.
5. Once the screws are in place, place the handlebar bar locking handles on the outside of the upper handlebar
and secure them until they are tight.
2
INSTALLING THE COLLECTION BASKET
1. Place the plastic clips on the metal frame and make sure they are fully secured.
2. Lift the rear discharge cover with one hand and hook the collection basket. Release the rear discharge cap
to secure the grass bag.
3 4
7
75
5
EN