Setup; Step 1: Safely Connect The Earphones To The Amplifier; Step 2: Connect A Sound Source To The Amplifier; Step 3: Power On The Amplifier - Shure KSE1200 Manual

Shure Incorporated

Setup

Step 1: Safely connect the earphones to the amplifier

Plug into the amplifier with the amplifier powered off. This is recommended to avoid hearing damage.
Note: Align the red dot on the earphone cable connector with the red dot on the amplifier earphone output. To Disconnect from the amplifier: Pull the knurled
connector collar up to safely release the lock on the earphone cable.

Step 2: Connect a sound source to the amplifier.

Plug the audio device into the LINE IN input.

Step 3: Power on the amplifier

To charge the battery while listening to audio, connect the amplifier to a computer, external battery, or AC power source.
Note: Volume should be adjusted only by using the amp volume knob for best performance. Ensure that volume is optimized in your audio source.

Lithium-ion Rechargeable Batteries

Storing Batteries

To avoid degrading battery health, keep the storage temperature range between 10°C to 25°C (50°F to 77°F).

Battery Repair and Replacement

Lithium­ion batteries have no "memory effect", and instead experience a more linear reduction in capacity. Contact Shure Ser­
vice and Repair to replace the battery if you experience any issues.
7/14