LG M3200C-BAF Manual page 27

Selecting the options
To use this function
•
- Must be displayed with various other products.
- Must be in a function that can be connected to RS-232C or RGB Out
Tile mode
It is used to enlarge the screen and also used with several
products to view screen,
Tile mode and choose Tile alignment and set the ID
of the current product to set location.
* Only after pressing the SET button the
adjustments made to the settings will be saved.
• Position
The location of the screen can be
adjusted at the Position menu and can
be set by adjusting the size of the bezel.
* If you exit the menu after making the
changes to the settings the adjustments
will be saved.
• H Size
Adjust the horizontal size of the screen
taking into account the size of the bezel.
• V Size
Adjust the vertical size of the screen
taking into account the size of the bezel.
• Tile recall
Function to initialize and release Tile.
All Tile setting are released when selecting
Tile recall and the screen returns to Full
screen.
• ID
Select the location of the Tile by setting
an ID.
A26